HiFlex Floor - on a higher level!
Replace your static concrete cable cellar design or super structure with a HiFlex prefabricated and modular raised floor system.
The HiFlex Floor system from Bergvik is the most cost effective and modular solution on the market with happy customers within Data Centers, Mining, Power Generation, and Pulp & Paper.
The HiFlex Floor is designed to allow for higher floor heights without affecting the stability of the floor, and provide for full access to the under-floor plenum. The plenum is used for cable management and placement of heavy equipment such as PDU's, CRAH units, transformers etc. The system allows for future reconfiguration of your equipment.
The HiFlex floor construction allows for floor heights up to 16 feet (4900 mm) and flexible pedestal placement of up to 8 x 8 feet (2400 x 2400 mm).
Open Bottom Access for Electrical Equipment
By simply replacing panels with square steel tubing under the electrical equipment areas, it provides for an open bottom access for easy cable access as well as direct cooling, if required.
With heights over 6,5 feet (2000 mm) there are no needs for loose laid floor panels. Instead, larger floor panels with tounge and groove and laminate surface finish are bolted to the substructure. Other surface finishes are also available.
Features and Benefits
For floor heights from 6,5 - 16 feet. For floor heights below 6,5 feet, we recommend the Iso Floor system.
All heavy electrical equipment including transformers up to 20 000 Lbs (9000 Kg) are supported directly by the rigid and self-supporting sub-structure. No costly equipment stands are needed.
Unique system flexibility means that future equipment expansion are built into the floor design.
Up to 8 x 8 feet spacing between pedestals.
No obstructing pedestals under cabinets or in cable routes due to flexible pedestal placement.
All under floor cable management installations can be supported directly by the HiFlex Floor sub-structure.
Brochure in English on HiFlex Floor will soon be available